usb keyboard does not work in emergency console
I made a diff of lsmod when plugging in the keyboard. dmesg also included.
PS this install has udev running.
@@ -1,4 +1,8 @@
Module Size Used by Not tainted
+hid_generic 1188 0
+usbhid 29506 0
+hid 84338 2 hid_generic,usbhid
+usbkbd 4460 0
ipv6 290957 20
af_packet 26467 0
fbcon 34076 70
@@ -94,7 +98,7 @@
pata_acpi 3286 0
libata 180626 3 ata_generic,ata_piix,pata_acpi
usb_storage 48293 2 ums_realtek
-usbcore 161029 7 btusb,ums_realtek,uvcvideo,ehci_pci,ehci_hcd,uhci_hcd,usb_storage
+usbcore 161029 9 usbhid,usbkbd,btusb,ums_realtek,uvcvideo,ehci_pci,ehci_hcd,uhci_hcd,usb_storage
usb_common 1037 1 usbcore
sd_mod 26613 2
scsi_mod 108736 4 sr_mod,libata,usb_storage,sd_mod
[ 1.232354] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.303355] tsc: Refined TSC clocksource calibration: 1995.224 MHz
[ 1.303363] Switching to clocksource tsc
[ 1.453349] usb 7-1: new high-speed USB device number 2 using ehci-pci
[ 1.827375] usb 7-1: New USB device found, idVendor=0bda, idProduct=0158
[ 1.827379] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.827381] usb 7-1: Product: USB2.0-CRW
[ 1.827384] usb 7-1: Manufacturer: Generic
[ 1.827387] usb 7-1: SerialNumber: 20071114173400000
[ 2.193348] usb 7-4: new high-speed USB device number 4 using ehci-pci
[ 2.337627] usb 7-4: New USB device found, idVendor=0408, idProduct=20ba
[ 2.337632] usb 7-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.337635] usb 7-4: Product: USB Webcam
[ 2.337638] usb 7-4: Manufacturer: SN001
[ 2.446682] usb 8-2: new high-speed USB device number 2 using ehci-pci
[ 2.505782] ehci-pci 0000:00:1d.7: port 2 reset error -110
[ 2.506676] ehci-pci 0000:00:1d.7: port 2 reset error -110
[ 2.510664] ehci-pci 0000:00:1d.7: port 2 reset error -110
[ 2.513108] ehci-pci 0000:00:1d.7: port 2 reset error -110
[ 2.514002] ehci-pci 0000:00:1d.7: port 2 reset error -110
[ 2.515554] hub 8-0:1.0: hub_port_status failed (err = -32)
[ 2.716694] hub 8-0:1.0: unable to enumerate USB device on port 2
[ 3.073345] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 3.235660] usb 2-1: New USB device found, idVendor=18e8, idProduct=6252
[ 3.235664] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.235667] usb 2-1: Product: Broadcom Bluetooth USB
[ 3.235670] usb 2-1: Manufacturer: Broadcom Corp
[ 3.586679] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 3.720702] usb 3-2: not running at top speed; connect to a high speed hub
[ 3.748700] usb 3-2: New USB device found, idVendor=14cd, idProduct=121c
[ 3.748704] usb 3-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 3.748707] usb 3-2: Product: Mass Storage Device
[ 3.748709] usb 3-2: Manufacturer: Generic
[ 3.748712] usb 3-2: SerialNumber: 812320100708
[ 3.753368] scsi4 : usb-storage 3-2:1.0
[ 4.838733] scsi 4:0:0:0: Direct-Access USB Mass Storage Device PQ: 0 ANSI: 0 CCS
[ 4.850742] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.984743] sd 4:0:0:0: [sdb] 7716864 512-byte logical blocks: (3.95 GB/3.67 GiB)
[ 4.990716] sd 4:0:0:0: [sdb] No Caching mode page present
[ 4.990721] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.006711] sd 4:0:0:0: [sdb] No Caching mode page present
[ 5.006714] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 5.012717] sdb: sdb1
[ 5.260729] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 193.869329] udevd[1102]: starting version 175
[ 195.423372] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 195.423686] ACPI: AC Adapter [ACAD] (on-line)
[ 195.543435] ACPI: Requesting acpi_cpufreq
[ 195.543747] Monitor-Mwait will be used to enter C-1 state
[ 195.543755] Monitor-Mwait will be used to enter C-2 state
[ 195.543760] Monitor-Mwait will be used to enter C-3 state
[ 195.543764] tsc: Marking TSC unstable due to TSC halts in idle
[ 195.543778] ACPI: acpi_idle registered with cpuidle
[ 195.544182] Switching to clocksource hpet
[ 195.622150] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 195.622159] ACPI: Power Button [PWRB]
[ 195.622220] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 195.630054] ACPI: Lid Switch [LID0]
[ 195.630138] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 195.630145] ACPI: Sleep Button [SLPB]
[ 195.630231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 195.630234] ACPI: Power Button [PWRF]
[ 195.694996] thermal LNXTHERM:00: registered as thermal_zone0
[ 195.695000] ACPI: Thermal Zone [TZ01] (76 C)
[ 195.935928] acpi device:07: registered as cooling_device2
[ 195.935959] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 195.936016] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
[ 195.974162] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 195.974172] ACPI: Battery Slot [BAT0] (battery present)
[ 196.438951] wmi: Mapper loaded
[ 196.749704] Linux agpgart interface v0.103
[ 196.868938] [drm] Initialized drm 1.1.0 20060810
[ 197.464399] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x298480a2
[ 197.464405] nouveau [ DEVICE][0000:01:00.0] Chipset: G98 (NV98)
[ 197.464407] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 197.465960] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 197.557284] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 197.557288] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 197.557543] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 197.557546] nouveau [ VBIOS][0000:01:00.0] version 62.98.4e.00.33
[ 197.577827] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 197.577831] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 197.577834] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 197.603765] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 197.603776] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
[ 197.603787] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 197.603792] nouveau [ PTHERM][0000:01:00.0] Programmed thresholds [ 90(3), 95(3), 105(2), 110(5) ]
[ 197.604010] [TTM] Zone kernel: Available graphics memory: 1025786 kiB
[ 197.604012] [TTM] Initializing pool allocator
[ 197.604020] [TTM] Initializing DMA pool allocator
[ 197.604717] nouveau [ DRM] VRAM: 256 MiB
[ 197.604722] nouveau [ DRM] GART: 512 MiB
[ 197.604728] nouveau [ DRM] TMDS table version 2.0
[ 197.604731] nouveau [ DRM] DCB version 4.0
[ 197.604734] nouveau [ DRM] DCB outp 00: 01000323 00010034
[ 197.604737] nouveau [ DRM] DCB outp 01: 02014300 00000028
[ 197.604740] nouveau [ DRM] DCB outp 02: 02021332 00020010
[ 197.604742] nouveau [ DRM] DCB conn 00: 00000340
[ 197.604745] nouveau [ DRM] DCB conn 01: 00001061
[ 197.604748] nouveau [ DRM] DCB conn 02: 00000147
[ 197.604750] nouveau [ DRM] DCB conn 03: 00002131
[ 197.604753] nouveau [ DRM] DCB conn 04: 00000400
[ 197.604755] nouveau [ DRM] DCB conn 05: 00000210
[ 197.604757] nouveau [ DRM] DCB conn 06: 00000211
[ 197.604760] nouveau [ DRM] DCB conn 07: 00000213
[ 197.623400] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 197.623403] [drm] No driver support for vblank timestamp query.
[ 197.623407] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 197.623555] nouveau [ DRM] 4 available performance level(s)
[ 197.623560] nouveau [ DRM] 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100%
[ 197.623564] nouveau [ DRM] 1: core 275MHz shader 550MHz memory 250MHz voltage 900mV fanspeed 100%
[ 197.623569] nouveau [ DRM] 2: core 500MHz shader 1000MHz memory 400MHz voltage 1090mV fanspeed 100%
[ 197.623573] nouveau [ DRM] 3: core 580MHz shader 1450MHz memory 400MHz voltage 1170mV fanspeed 100%
[ 197.623578] nouveau [ DRM] c: core 275MHz shader 550MHz memory 249MHz voltage 1090mV
[ 197.648999] nouveau [ DRM] MM: using M2MF for buffer copies
[ 197.695109] nouveau [ DRM] allocated 1280x800 fb: 0x60000, bo ffff88007b876800
[ 197.695212] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 197.695215] nouveau 0000:01:00.0: registered panic notifier
[ 197.695220] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 197.882352] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 197.882721] r8169 0000:05:00.0: irq 44 for MSI/MSI-X
[ 197.882881] r8169 0000:05:00.0 eth0: RTL8102e at 0xffffc9000463a000, 00:1e:68:f2:c9:67, XID 14a00000 IRQ 44
[ 197.970997] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130117/utaddress-251)
[ 197.971005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 197.971009] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 197.971014] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 197.971016] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 197.971021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 197.971023] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 197.976788] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 198.492325] iTCO_vendor_support: vendor-support=0
[ 198.492655] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 198.492695] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 198.492826] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 199.036382] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 199.286243] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 199.286397] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 199.286471] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 199.361386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 199.426856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 199.691853] cfg80211: Calling CRDA to update world regulatory domain
[ 199.878065] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 199.878070] Copyright(c) 2003-2013 Intel Corporation
[ 199.878375] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[ 199.884544] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 200.190782] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[ 200.754376] media: Linux media interface: v0.10
[ 201.018292] Linux video capture interface: v2.00
[ 201.142146] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 201.142151] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 201.142154] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 201.142157] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 201.142160] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 201.142163] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 201.142193] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 201.148025] uvcvideo: Found UVC 1.00 device USB Webcam (0408:20ba)
[ 201.148075] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 201.154215] input: USB Webcam as /devices/pci0000:00/0000:00:1a.7/usb7/7-4/7-4:1.0/input/input10
[ 201.160705] usbcore: registered new interface driver uvcvideo
[ 201.160709] USB Video Class driver (1.1.1)
[ 201.220615] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 201.275663] scsi5 : usb-storage 7-1:1.0
[ 201.275748] usbcore: registered new interface driver ums-realtek
[ 201.418892] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 201.588411] mousedev: PS/2 mouse device common for all mice
[ 201.876219] Bluetooth: Core ver 2.16
[ 201.876248] NET: Registered protocol family 31
[ 201.876250] Bluetooth: HCI device and connection manager initialized
[ 201.876261] Bluetooth: HCI socket layer initialized
[ 201.876265] Bluetooth: L2CAP socket layer initialized
[ 201.876273] Bluetooth: SCO socket layer initialized
[ 201.939287] usbcore: registered new interface driver btusb
[ 202.278929] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 202.284427] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 203.481130] Console: switching to colour frame buffer device 160x50
[ 203.575354] NET: Registered protocol family 17
[ 203.592794] grsec: time set by /bin/busybox[hwclock:1396] uid/euid:0/0 gid/egid:0/0, parent /lib/rc/sh/runscript.sh[runscript.sh:1387] uid/euid:0/0 gid/egid:0/0
[ 203.781198] r8169 0000:05:00.0 eth0: link down
[ 203.781235] r8169 0000:05:00.0 eth0: link down
[ 205.373816] r8169 0000:05:00.0 eth0: link up
[ 211.162428] NET: Registered protocol family 10
[ 239.573346] usb 3-1: new low-speed USB device number 3 using uhci_hcd
[ 239.839828] usb 3-1: New USB device found, idVendor=046e, idProduct=52c1
[ 239.839832] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 239.839835] usb 3-1: Product: USB Multimedia Keyboard
[ 239.839838] usb 3-1: Manufacturer: BTC
[ 240.015216] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input12
[ 240.015328] usbcore: registered new interface driver usbkbd
[ 240.017378] hidraw: raw HID events driver (C) Jiri Kosina
[ 240.134903] usbcore: registered new interface driver usbhid
[ 240.134906] usbhid: USB HID core driver
[ 240.207904] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.1/input/input13
[ 240.208037] hid-generic 0003:046E:52C1.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1/input1
(from redmine: issue id 2071, created on 2013-06-06, closed on 2013-08-07)
- Changesets:
- Revision 79fd28fa by Natanael Copa on 2013-08-07T08:40:02Z:
main/busybox-initscripts: fix module autoloading
ref #2071
- Revision 17479535 by Natanael Copa on 2013-08-07T08:40:49Z:
main/mkinitfs: add hid-generic driver to fix usb keyboards
ref #2071
- Revision 28da60a0 by Natanael Copa on 2013-08-07T13:36:38Z:
main/busybox-initscripts: fix module autoloading
ref #2071
(cherry picked from commit 79fd28fa96d12a25831ef7761d58c633ab9cb727)
- Revision f0b47644 by Natanael Copa on 2013-08-07T13:37:00Z:
main/mkinitfs: upgrade to 2.5.0
fixes #2071